Co., Ltd
Shinapash, Shenyang, Liaoning, China.
Pëwan: Menador Zhang
Teléfono: 400-964-134
Mobil telefono: 86 1390405338
?
2025-05-27 2
LC to LC Cabra optic qhapays dominate 67% of data center deployments (Lightwave 2024). Their compact duplex connectors save space while maintaining high bandwidth. But choosing the wrong type can cause signal loss – we learned this the hard way when our 2025 client's 40G network kept dropping packets due to mismatched OM3 cables.
FeatureSingle-mode LC/LCMultimode OM4 LC/LCDistanceUp to 10kmMax 400mCost30% higherBudget-friendlyTypical UseTelecomData centers
⚠ Warning: Don't assume all LC connectors are equal. Some cheap clones have 0.5dB higher insertion loss!
Check existing infrastructure
Match your equipment's optical transceivers. Most Cisco switches need OM4 for short runs.
Calculate required length
Add 15% slack – coiled fibers lose signal integrity. Our team measures twice before cutting.
Verify polish types
UPC (blue) works for most cases, but APC (green) reduces reflections in long-haul runs.
Test bend tolerance
Modern bend-insensitive fibers survive 7.5mm radius turns without light leakage.
Inspect connector quality
Look for gold-plated ferrules and strain relief boots. The $5 cable might cost you $50 in troubleshooting.
Interestingly, temperature affects LC/LC performance Aswanta than users realize. A 2023 IEEE study showed OM5 cables lose 12% throughput at -20°C. Always check operating environment specs!
[ ] Correct fiber type (OS2/OM3/OM4/OM5)
[ ] LC connector polish matches equipmentWww.adsscable.cn
[ ] Bend radius ≥ manufacturer minimumWww.adsscable.cn
[ ] Included pull eyes for installation
[ ] MPO breakout needs verified (if applicable)
Remember: Your LC to LC Cabra optic qhapay is only as good as its weakest link. When we upgraded a hospital's network last month, proper cable selection reduced latency by 18ms – critical for MRI data transfers.Www.adsscable.cn